Juniper M Series Monitoring And Troubleshooting Manual page 555

Sample Output
Meaning
Display SSB Error Messages in the Chassis Daemon Log File
Purpose
Action
Sample Output
Meaning
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
user@host> show log messages
Jul 10 13:28:45 myrouter /kernel: fxp1: media DOWN 100Mb / full-duplex
Jul 10 13:28:45 myrouter /kernel: fxp1: media DOWN 10Mb / half-duplex
Jul 10 13:28:45 myrouter /kernel: fxp1: media DOWN 100Mb / full-duplex
Jul 10 13:28:45 myrouter /kernel: fxp1: link UP 100Mb / full-duplex
Jul 10 13:28:45 myrouter rpd[564]: EVENT <UpDown> fxp1.0 index 1 <Up Broadcast
Multicast> address #0 0.a0.a5.12.1d.6d
Jul 10 13:28:45 myrouter mib2d[563]: SNMP_TRAP_LINK_UP: ifIndex 2, ifAdminStatus
up(1), ifOperStatus up(1), ifName fxp1
[...Output truncated...]
The messages system log file records the time the failure or event occurred, the severity
level, a code, and a message description. You can also use the
command to see error messages that are generated when an SSB fails or is offline.
ssb
Use this information to diagnose a problem and to let the Juniper Networks Technical
Assistance Center (JTAC) know what the error messages are and the router events that
occurred before and after the problem. For more information about system log messages,
see the Junos OS System Log Messages Reference.
To determine the details of the SSB error messages in the chassis daemon log file.
To display the SSB error messages in the chassis daemon (
following command:
user@host> show log chassisd | match ssb
user@host> show log chassisd |match ssb
Jul 10 13:27:28 SSB0 is now not present
Jul 10 13:27:28 Assert reset on SSB0
Jul 10 13:27:28 Turn on ethernet loop
[...Output truncated...]
The database provides the date, time, and a component status message. The
chassisd
chassisd database is dynamic. It is initialized at router startup and is updated when
components are added or removed. You can search for multiple items in the
log file by using the
| match "item | item | item"
| match "ssb | kernel | tnp"
Networking Protocol (TNP), and indicates communication issues between the Routing
Engine and the Packet Forwarding Engine components.
Checklist for Monitoring the SSB on page 505
command. For example,
is a search for error messages for the SSB, kernel, and Trivial
Chapter 23: Monitoring the SSB
show log messages | match
) log file, use the
chassisd
chassisd
511