Figure 278: Feb Component; Figure 279: M5 And M10 Router Feb Location; Monitor The Feb Status - Juniper M Series Monitoring And Troubleshooting Manual

Related
Documentation

Monitor the FEB Status

Copyright © 2012, Juniper Networks, Inc.

Figure 278: FEB Component

The FEB is located on the rear of the router above the power supplies (see
page 555).

Figure 279: M5 and M10 Router FEB Location

The FEB is field-replaceable, but is not hot-removable or hot-pluggable. You must power
down the router before removing or replacing the FEB.
To replace the FEB, see "Return the Failed Component" on page
Checklist for Monitoring the FEB on page 553
If the FEB fails, no information about chassis components is available through the CLI.
To monitor the FEB status:
Display the FEB Environmental Status on page 556
1.
Display the FEB Detailed Status on page 556
2.
Chapter 27: Monitoring the FEB
Figure 279 on
116.
555