Figure 74: T640 Router Redundant Host Module Leds; Figure 75: T1600 Router Redundant Host Module Leds; Check The T1600 Router Routing Engine Leds; Table 51: T640 Router Host Subsystem Leds - Juniper M Series Monitoring And Troubleshooting Manual

Hide thumbs Also See for M Series:

Table of Contents

M Series and T Series Routers Monitoring and Troubleshooting Guide

Figure 74: T640 Router Redundant Host Module LEDs

Documentation

Table 51 on page 188

describes the functions of the host subsystem LEDs.

T640 Core Router Overview on page 31

Each host subsystem has three LEDs, located on the upper right of the craft interface,

which indicate status. The LEDs labeled

and the Control Board in slot

of the Routing Engine in slot

Figure 75 on page 188

shows the host module LEDs on the T1600 router craft interface.

FPC LEDs and online/offline buttons

Table 52 on page 189

describes the functions of the host subsystem LEDs.

Host module is online and functioning

Host module is offline.

Host module is functioning as master.

show the status of the Routing Engine

. The LEDs labeled

and the Control Board in slot

show the status