Figure 84: Inserting The Fiber-Optic Array Adapter Into The Connector Slot; Figure 85: Inserting The Cleaning Tip Into The Keyed Slot Of The Fiber-Optic Array - Juniper TX MATRIX Hardware Manual

TX Matrix Hardware Guide
202

Figure 84: Inserting the Fiber-Optic Array Adapter into the Connector Slot

Remove the dust cap from the cleaning tool.
4.
Insert the tip of the dry cloth cleaning tool into the fiber-optic array adapter (see Figure
5.
85 on page 202).
Figure 85: Inserting the Cleaning Tip into the Keyed Slot of the Fiber-Optic
Array Adapter
NOTE: The fiber-optic array adapter is keyed to ensure that the cleaning
tip can be inserted in only one way.
Rotate the thumb wheel in the direction indicated on the cleaning tool until the thumb
6.
wheel clicks to indicate a completed cleaning action (see Figure 86 on page 203).
Copyright © 2010, Juniper Networks, Inc.