About The Documentation; Documentation And Release Notes; Using The Examples In This Manual - Juniper MX240 Hardware Manual

About the Documentation

Documentation and Release Notes

Using the Examples in This Manual

Copyright © 2019, Juniper Networks, Inc.
Documentation and Release Notes on page xxi
Using the Examples in This Manual on page xxi
Documentation Conventions on page xxiii
Documentation Feedback on page xxv
Requesting Technical Support on page xxv
To obtain the most current version of all Juniper Networks
see the product documentation page on the Juniper Networks website at
https://www.juniper.net/documentation/
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at
https://www.juniper.net/books
If you want to use the examples in this manual, you can use the
command. These commands cause the software to merge the incoming
merge relative
configuration into the current candidate configuration. The example does not become
active until you commit the candidate configuration.
If the example configuration contains the top level of the hierarchy (or multiple
hierarchies), the example is a full example. In this case, use the
If the example configuration does not start at the top level of the hierarchy, the example
is a snippet. In this case, use the
described in the following sections.
®
.
.
load merge relative command. These procedures are
technical documentation,
load merge or the load
command.
load merge
xxi