Configuring Broadcast Storm Control - Enterasys VH-2402S Management Manual

Configuring Broadcast Storm Control

Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown below:
Broadcast control on all ports :
-------------------------------------------------------
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Figure 2-31. Broadcast Storm Control Configuration
Parameter
Broadcast Control on
All Ports
Threshold
Broadcast Control
9033645-01
Vertical Horizon Local Management -- VH-2402S
Broadcast Storm Control Configuration : Unit 1 Port 1-12
Port Threshold
1 500
2 500
3 500
4 500
5 500
6 500
7 500
8 500
9 500
10 500
11 500
12 500
Use <TAB> or arrow keys to move. <Enter> to select
Description
Allows you to enable/disable broadcast storm control for all ports
on the switch.
The packet-per-second threshold for broadcast packets on the
port. (Default is 500 pps.)
Enables/disables broadcast control for the port. When enabled,
the switch drops all broadcast packets if the packet-per-second
threshold is exceeded. (Default is Enabled.)
[Enable] [Disable]
Broadcast Control
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
VH-2402S User Interface 43