Set Port Negotiation - Enterasys Matrix E1 1G694-13 Configuration Manual

Port Configuration
Setting Port Auto-Negotiation
4.2.3.2

set port negotiation

Use this command to enable or disable auto-negotiation on one or more ports.
set port negotiation port_string {disable | enable}
Syntax Description
port_string
disable | enable
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable auto-negotiation on Gigabit Ethernet front panel port 11:
Matrix>set port negotiation ge.0.11 disable
Auto negotiation disabled for port ge.0.11.
4-16 Matrix E1 Series (1G694-13) Configuration Guide
Specifies the port(s) for which auto-negotiation will be
enabled or disabled. For a detailed description of possible
port_string values, refer to
Disables or enables auto-negotiation.
Section 4.1.2.