Checking The Line Beam Position (Surrounding Image) - Omron Z550 Operation Manual

SECTION 4
Other Functions
Checking the Line Beam Position
(Surrounding Image)
Images of the area surrounding the part that the line beam strikes can be displayed on the screen.
Whether or not the beam strikes the part required for measurement can be checked on the screen.This is
a convenient function when the sensor is installed inside a device, preventing the measurement area
from being checked directly.
1.
Move the cursor to [Run
A list of modes appears.
2.
Select [Tools].
The selections appear.
3.
Select [Surrounding image].
The sensor selections are displayed if two sensors are
connected.
Select the number of the sensor used for displaying the
image.
Z550
164
Operation Manual
] and press the ENT Key.
Scn 0 Run
Scn 0 Run
Set
Run
Tools
System
Save
Scn 0 Tools
Test
Surrounding image
Backup