Masking Display Of Processing Items; Shortening Scene Group Switching Time - Omron F160 Operation Manual

Customizing Operations
6-5-4

Masking Display of Processing Items

Example:
The default display items set under
measurement regions.
0.Scn 0 =SET= Measurement
0.1. Area(var. box)
1. Defect(var. box)
2. Gravity and area
3. Gravity and axis
4. OCR for 1 chara
5. Classification
6. Defect
7. Density data
↑ ↓ ↑ ↓
SeeAlso
6-5-5

Shortening Scene Group Switching Time

The F160 has multiple processing items and these are displayed when mea-
surement regions are being set. Each item can be set to be displayed or not
displayed.
1. Enter System mode and select Operation settings.
Refer to page 284.
The Menu will be displayed.
Set key operation
Display capture
Setting menu masking
Processing item masking
Save at switch Sc Group
Password
2. Select Processing item masking.
The Processing Item Masking Settings Screen will be displayed.
Processing item masking
Area(var. box)
Defect(var. box)
Gravity and area
Gravity and axis
OCR for 1 chara
Classification
Defect
Density data
↑ ↓
End
3. Turn ON masking for the items that are not to be displayed.
ON: Not displayed (masked)
OFF: Displayed (not masked)
4. Select End.
The settings will be saved and the screen in (2.) will return.
Normally, settings data is saved to flash memory and the Memory Card when
scene groups are changed. The time taken to save is, therefore, added to the
time taken to change scene groups. The time to change scene for changes in
measurement setups can be reduced by omitting the save process.
Area (var. box) and Defect (var. box)
set to not appear.
0.Scn 0 =SET= Measurement
0.1. Gravity and area
1. Gravity and axis
2. OCR for 1 chara
3. Classification
4. Defect
5. Density data
6. Edge pitch
7. Edge position
↑ ↓ ↑ ↓
:
OFF
:
OFF
:
OFF
:
OFF
:
OFF
:
OFF
:
OFF
:
OFF
Section 6-5
307