Motorola MPC533 Reference Manual page 273

configuration word and the TEXP output function are both required, RSTCONF should be
asserted until SRESET is negated.
Figure 7-3 to Figure 7-6 provide sample reset configuration timings.
Timing diagrams in the following figures are not to scale.
CLKOUT
PORESET
Internal poreset
HRESET
RSTCONF
Internal data[0:31]
Figure 7-3. Reset Configuration Sampling Scheme
For "Short" PORESET Assertion, Limp Mode Disabled
MOTOROLA
PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE
NOTE
Default
Chapter 7. Reset
RSTCONF Controlled
Reset Configuration
Tsup
7-9