Motorola MPC533 Reference Manual page 730

MIOS14 Configuration
• <submodule short_prefix>
• <submodule number>
• <signal attribute suffix> (optional)
• <bit number> (optional)
The signal prefix and suffix for the different MIOS14 submodules are as follows:
• MMCSM:
— submodule short_prefix: "MC"
— signal attribute suffix: C for the clock signal
— signal attribute suffix: L for the load signal
— For example, an MMCSM placed as submodule number n would have its
corresponding input clock pin named MMCnC and its input load pin named
MMCnL. On the , MMC6C is input on MDA11 and MMC22C is input on
MDA13. The MMC6L is input on MDA12 and MMC22C is input on MDA14.
• MDASM:
— submodule short_prefix: "DA"
— signal attribute suffix: none
— For example a MDASM placed as submodule number n would have its
corresponding channel I/O signal named MDAn
• MPWMSM:
— submodule short_prefix: "PWM"
— signal attribute suffix: none
— For example a MPWMSM placed as submodule number n would have its
corresponding channel I/O signal named MPWMn
• MPIOSM:
— submodule short_prefix: "PIO"
— signal attribute suffix: B
— For example a MPIOSM placed as submodule number n would have its
corresponding I/O signals named MPIOnB0 to MPIOnB15 for bit-0 to bit-15,
respectively.
In the MIOS14, some signals are multiplexed between submodules using the same signal
names for the inputs and outputs which are connected as shown in Table 17-1.
17.3 MIOS14 Configuration
The complete MIOS14 submodule and signal configuration is shown in Table 17-1.
17-6
PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE
MPC533 Reference Manual MOTOROLA