Maintaining The Ptx5000 Pics; Replacing A Ptx5000 Pic - Juniper PTX5000 Hardware Manual

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Maintaining the PTX5000 PICs

IN THIS SECTION

Purpose | 524

Action | 524

For optimum performance, verify the condition of the PICs.

On a regular basis:

• Check the LEDs on PIC faceplates. The meaning of the LED states differs for various PICs. For more

information, see the

PTX Series Interface Module

PIC failure, the FPC generates an alarm message to be sent to the Routing Engine.

A PIC LED lit green indicates that the PIC is functioning normally.

• Issue the CLI show chassis fpc pic-status command. The PIC slots in an FPC are numbered from 0

through 1, top to bottom.

IN THIS SECTION

Removing a PTX5000 PIC | 525

Installing a PTX5000 PIC | 526

Reference. If the FPC that houses the PIC detects a

Table of Contents