Juniper PTX5000 Hardware Manual page 331

Table 81: Tools and Parts Required for Component Replacement
Components Tool or part
DC power cable 7/16-in. (11-mm) nut driver
CAUTION: You must use an appropriate torque-controlled tool to tighten the nuts.
Applying excessive torque damages the terminal studs and the PDU input power trays.
Fan tray Phillips (+) screwdrivers, numbers 1 and 2
FPC Phillips (+) screwdrivers, numbers 1 and 2
Blank panel (if component is not reinstalled)
Electrostatic bag or antistatic mat
PIC Phillips (+) screwdrivers, numbers 1 and 2
Rubber safety cap for fiber-optic PICs or fiber-optic PIC cables
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Routing Engine Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
SIB Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
(Continued)
313