Ptx5000 Installation Safety Guidelines - Juniper PTX5000 Hardware Manual

• See "Connecting the PTX5000 to a Management Console or Auxiliary Device" on page
• See "Connecting the PTX5000 to a Management Ethernet Device" on page
• See "Connecting the PTX5000 to an External Alarm-Reporting Device" on page
• See "Connecting the PTX5000 to an External Clocking Device" on page
8. Connect the power, and power on the PTX5000.
• 60-A DC PDU and PSM—See
on page 262 and "Powering On the DC Powered PTX5000 with 60-A DC PDUs and 60-A DC
PSMs" on page 294.
• 120-A DC PDU and PSM—See
on page 266 and "Powering On the DC Powered PTX5000 with 120-A DC PDUs and 120-A DC
PSMs" on page 296.
• High Capacity DC PDU and PSM—See
PDUs" on page 270
and High Capacity DC PSMs" on page
• Three-phase delta AC PDU and AC PSM—See
Delta AC PDUs" on page 222
page 291.
• Three-phase wye AC PDU and AC PSM—See
Wye AC PDUs" on page 229
291.

PTX5000 Installation Safety Guidelines

IN THIS SECTION
General Installation Safety Guidelines | 199
Chassis Lifting Guidelines | 199
Observe the following guidelines before and during PTX5000 installation:
"Connecting Power to the PTX5000 60-A DC Input Power Trays"
"Connecting Power to the PTX5000 120-A DC Input Power Trays"
"Connecting Power to the PTX5000 High Capacity DC
and "Powering On the DC-Powered PTX5000 with High Capacity DC PDUs
298.
"Connecting Power to the PTX5000 Three-Phase
and "Powering On the Three-Phase AC-Powered PTX5000" on
"Connecting Power to the PTX5000 Three-Phase
and "Powering On the Three-Phase AC-Powered PTX5000" on page
275.
276.
278.
278.
198