Troubleshooting The Ptx5000 Control Boards - Juniper PTX5000 Hardware Manual

SEE ALSO
PTX5000 Routing Engine LEDs | 123

Troubleshooting the PTX5000 Control Boards

IN THIS SECTION
Problem | 611
Solution | 611
Problem
Description
The following alarms and LEDs indicate a problem with a Control Board:
• Table 94 on page 612 lists the alarms.
• Table 95 on page 612 lists the Control Board LEDs.
Solution
To troubleshoot the Control Boards:
1. Check the LEDs on the faceplate of each Control Board and the craft interface.
2. Use the CLI to check for alarms. Issue the show chassis alarms command to view the alarms.
In Table 94 on page 612, the text in the LCD Message column appears in the display of the craft
interface. The text in the CLI Message column appears in the output from the show chassis alarms
command.
611