Upgrading The Ptx5000 Fpcs; Preparing To Upgrade The Fpcs In A Ptx5000 - Juniper PTX5000 Hardware Manual

PTX5000 PIC Description | 148
Troubleshooting the PTX5000 FPCs | 620
Troubleshooting the PTX5000 PICs and PIC Transceivers | 625
Prevention of Electrostatic Discharge Damage

Upgrading the PTX5000 FPCs

IN THIS SECTION

Preparing to Upgrade the FPCs in a PTX5000 | 543

PTX5000 FPC Upgrade Kit | 544
Upgrading the FPCs in an Operational PTX5000 | 546
Upgrading the FPCs in an Offline PTX5000 | 558
Preparing to Upgrade the FPCs in a PTX5000
When you upgrade a PTX5000 to use second-generation or third-generation FPCs, the forwarding
capacity increases. See "FPCs Supported on the PTX5000" on page 147
forwarding capacity for each type of FPC.
To prepare to upgrade the FPCs in a PTX5000:
1. Ensure the site still meets the requirements—such as weight and power—when using the new
components. See "Overview of Preparing the Site for the PTX5000" on page 160
2. Determine the model numbers of the following components already installed:
• SIBs
• FPCs
• Power distribution units (PDUs)
• Power supply modules (PSMs)
3. Ensure you have the required new components.
for more information about the
543