Troubleshooting The Ptx5000 Centralized Clock Generators - Juniper PTX5000 Hardware Manual

For more information and troubleshooting for chassis alarms, see the following documentation:
• See "Troubleshooting the PTX5000 Cooling System" on page
• See "Troubleshooting the PTX5000 Centralized Clock Generators" on page
• See "Troubleshooting the PTX5000 Control Boards" on page
• See "Troubleshooting the PTX5000 FPCs" on page
• See "Troubleshooting the PTX5000 Host Subsystem" on page 605
• See "Troubleshooting the PTX5000 PICs and PIC Transceivers" on page
• See "Troubleshooting the PTX5000 Power System" on page
• See "Troubleshooting the PTX5000 Routing Engines" on page 607
• See "Troubleshooting the PTX5000 Switch Interface Boards" on page
Interface Alarm Messages
Interface alarms indicate a problem with a specific network interface.
SEE ALSO
System-Wide Alarms and Alarms for Each Interface Type

Troubleshooting the PTX5000 Centralized Clock Generators

IN THIS SECTION
Problem | 572
Solution | 572
574.
571.
611.
620.
.
625.
591.
616.
571