Maintaining Mx240 Pics; Figure 122: Installing An Mpc - Juniper MX240 Hardware Manual

MX240 5G Universal Routing Platform Hardware Guide
See Also
See Also

Maintaining MX240 PICs

Purpose
Action
288
CAUTION: After the
before removing the MPC again, removing an MPC from a different slot,
or inserting an MPC in a different slot.
You can also verify correct MPC and MIC functioning by issuing the
show chassis fpc pic-status
page 282 and "Maintaining MX240 MICs" on page

Figure 122: Installing an MPC

MPC
SC B
SC B
MX240 Modular Port Concentrator (MPC) Description on page 127
MX240 MPC Serial Number Label on page 368
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
MX240 Modular Port Concentrator (MPC) Description on page 127
MX240 MPC Serial Number Label on page 368
Preventing Electrostatic Discharge Damage to an MX240 Router on page 380
For optimum router performance, verify the condition of the PICs and PIC cables.
On a regular basis:
Check the LEDs on PIC faceplates. The meaning of the LED states differs for various
PICs. For more information, see the
houses the PIC detects a PIC failure, the FPC generates an alarm message to be sent
to the Routing Engine.
Issue the CLI
show chassis fpc pic-status
numbered from 0 through
LED lights steadily, wait at least 30 seconds
OK/FAIL
commands described in "Maintaining MX240 MPCs" on
279.
MX Series Interface Module Reference
command. The PIC slots in an FPC are
1 , left to right:
show chassis fpc
. If the FPC that
Copyright © 2019, Juniper Networks, Inc.
and