Juniper PTX5000 Hardware Manual page 257

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Put the wires of the AC power cord through the hole of the metal retaining bracket, and screw the

retaining nut onto the AC power cord to secure it to the metal retaining bracket (see

Figure 105: Connecting the Metal Retaining Bracket to an AC Power Cord

NOTE: If you are using 150 A power, you must use a metal bracket that is larger than the

default metal bracket. This bracket is shipped along with the High Capacity Delta AC PDUs.

Labels on top of the metal brackets specify the power cords that can be used for each

Figure 105 on

Chapters

Table of Contents