Ptx5000 Management Interface Cable Specifications - Juniper PTX5000 Hardware Manual

SEE ALSO
PTX5000 Craft Interface Description | 19
Connecting the PTX5000 to an External Alarm-Reporting Device | 278

PTX5000 Management Interface Cable Specifications

Table 72 on page 193 lists the specifications for the cables that connect to the management ports on
the Control Board.
Table 72: Cable Specifications for Routing Engine Management
Port Cable Specification
Routing Engine RS-232 (EIA-232) serial
console or auxiliary cable
interface
Routing Engine Category 5 cable or
Host/Ethernet equivalent suitable for
interface 10/100-Mbps/1-Gbps
operation
(X) GE0 through (X) Ports are reserved for
GE0 interfaces future use.
GE4 interface Port is reserved for future
use.
SEE ALSO
PTX5000 Control Board Description | 131
Connecting the PTX5000 to a Management Console or Auxiliary Device | 275
Connecting the PTX5000 to a Management Ethernet Device | 276
Cable Supplied Maximum Length
One 6-ft (1.83-m) 6 ft (1.83 m)
length with RJ-45
connectors
One 15-ft (4.57-m) 328 ft (100 m)
length with RJ-45/
RJ-45 connectors
None 328 ft (100 m)
None 328 ft (100 m)
193
Router
Receptacle
RJ-45
RJ-45
SFP+
SFP