Juniper PTX5000 Hardware Manual page 38

Craft Interface Front Panel
Figure 6 on page 20 shows the craft interface.
Figure 6: Craft Interface
1 Alarm relay contacts
—
SIB LEDs
2
—
3 Host Subsystem LEDs
—
4 CCG LEDs
—
5 Fan tray LEDs
—
The front panel of the craft interface contains:
• A four-line LCD display, along with six navigation buttons. The LCD display operates in Idle mode or
alarm mode.
• Alarm relay contacts.
• Two configuration switches:
• The M/S configuration switch must be set to S.
• The CHASSIS ID configuration switch must always be set to 0.
NOTE: The CHASSIS ID configuration switch is set to 0 by default.
• LEDs
6 Alarm LEDs and ACO/LT button
—
M/S CHASSIS NUM configuration switches
7
—
8 Power system LEDs
—
9 LCD
—
10 LCD navigation buttons
—
20