Installing The High Capacity Psm Sleeves - Juniper PTX5000 Hardware Manual

Firmware Version
PDU 0 PSM 5 status:
State
Temperature
Fans
DC Input
DC Output
Hours Used
Firmware Version
PDU 0 PSM 6 status:
State
Temperature
Fans
DC Input
DC Output
Hours Used
Firmware Version
PDU 0 PSM 7 status:
State
Temperature
Fans
DC Input
DC Output
Hours Used
Firmware Version
SEE ALSO
PTX5000 DC Power System Description | 86

Installing the High Capacity PSM Sleeves

The High Capacity AC and DC PSMs are smaller than the AC PSMs and 60-A or 120-A DC PSMs. Eight
High Capacity AC or DC PSMs can be installed in a PTX5000. You must insert the PSM metal sleeves,
provided with the High Capacity power system upgrade kit, in front of the PTX5000 router chassis
before installing the PSMs. To install the PSM sleeve, you require the following tools and parts:
• Electrostatic discharge (ESD) grounding wrist strap (not provided)
• Phillips (+) screwdriver, number 1 (not provided)
01.46
Online
OK 37 degrees C / 98 degrees F
OK
OK
OK
69
01.46
Online
OK 38 degrees C / 100 degrees F
OK
OK
OK
68
01.46
Online
OK 36 degrees C / 96 degrees F
OK
OK
OK
69
01.46
457