Configuring System Attributes - Juniper PTX5000 Hardware Manual

2. Create a management console user account.
[edit]
root@host# set system login user
password
New Password:
Retype new password:
3. Set the user account class to super-user.
[edit]
root@host# set system login user

Configuring System Attributes

1. Configure the name of the PTX5000. If the name includes spaces, enclose the name in quotation
marks (" ").
[edit]
root@# set system host-name
NOTE: The DNS server does not use the hostname to resolve to the correct IP address. This
hostname is used to display the name of the device in the CLI. For example, this hostname is
displayed on the command-line prompt when the user is logged in to the CLI:
user-name @ host-name >
2. Configure the IP address of the DNS server.
[edit]
root# set system name-server
user-name authentication plain-text-password
password
user-name class super-user
host-name
address
305