Juniper PTX5000 Hardware Manual page 245

d. Insert the wire labeled L3 into the L3 input terminal.
Figure 92: Connecting Ground and Power to a Three-Phase Delta AC PDU
8. Verify that the AC power wiring connections are correct.
9. Close the door to the metal AC wiring compartment, and use a number 2 Phillips (+) screwdriver to
tighten the two captive screws to secure the door to the metal AC wiring compartment.
10. Verify that the AC power cord does not touch or block access to PTX5000 components, and that it
does not drape where people could trip on it.
227