Maintaining The M7I Routing Engine; Maintaining The M7I Fic And Fic Cables And Pics And Pic Cables - Juniper M7i Hardware Manual

M7i Multiservice Edge Router Hardware Guide

Maintaining the M7i Routing Engine

Purpose
Action
Related
Documentation

Maintaining the M7i FIC and FIC Cables and PICs and PIC Cables

Purpose
Action
192
For optimum performance, verify the condition of the Routing Engine.
Check the LEDs on the Routing Engine. The green LED labeled
when it is functioning normally. For more information about the LEDs, see
Engine Description" on page
Issue the CLI
show chassis routing-engine
Engines:
user@host> show chassis routing-engine
Routing Engine status:
Temperature
DRAM
Memory utilization
CPU utilization:
User
Background
Kernel
Interrupt
Idle
Model
Serial ID
Start time
Uptime
Load averages:
For further description of the output from the command, see the
Replacing the M7i Routing Engine on page 141
Routing Engine Interface Cable and Wire Specifications for the M7i Router on page 97
For optimum performance, verify the condition of the FIC and FIC cables and PICs and
PIC cables.
Check the LEDs on the FIC faceplate. The Fast Ethernet and Gigabit Ethernet ports on
the FIC have LEDs that display the status of the ports. For more information, see
Fixed Interface Card (FIC) Description" on page
Check the LEDs on PIC faceplates. Most PIC faceplates have an LED labeled
Some PICs have additional LEDs, often one per port. The meaning of the LED states
differs for various PICs. For more information, see the M7i Multiservice Edge Router
Interface Module Reference.
17.
command to check the status of the Routing
26 degrees C / 78 degrees F
256 MB
27 percent
0 percent
0 percent
4 percent
0 percent
96 percent
RE-5.0
1000392782
2003-06-11 11:39:32 PDT
1 hour, 41 minutes, 51 seconds
1 minute 5 minute
0.00
46.
Copyright © 2019, Juniper Networks, Inc.
ONLINE lights steadily
"M7i Routing
15 minute
0.03 0.05
CLI Explorer .
"M7i
STATUS .