Ptx5000 Chassis Description - Juniper PTX5000 Hardware Manual

PTX5000 Craft Interface LEDs | 23
PTX5000 Centralized Clock Generator Description | 29
PTX5000 Centralized Clock Generator LEDs | 30

PTX5000 Chassis Description

The PTX5000 chassis is a rigid sheet metal structure that houses all the other hardware components
(see Figure 3 on page 15 and
33.1 in. (84.1 cm) deep, and 17.5 in. (44.5 cm) wide. The chassis can be installed into many types of
racks or cabinets.
The chassis includes the following features (see
• Front-mounting flanges for mounting in a four-post rack or cabinet.
• Center-mounting metal brackets for center-mounting in an open-frame rack.
• Handles on each side to facilitate positioning the PTX5000 in the rack. Do not use the handles to lift
the PTX5000.
• Two electrostatic discharge (ESD) points (banana plug receptacles), one front and one rear (see
5 on page 17).
CAUTION: Before removing or installing components, attach an ESD strap to an ESD
point, and place the other end of the strap around your bare wrist. Failure to use an
ESD strap could result in damage to the hardware components.
Figure 4 on page 16). The chassis measures 62.5 in. (158.8 cm) high,
Figure 3 on page 15 and Figure 4 on page 16):
14
Figure