Powering On The Dc Powered Ptx5000 With 60-A Dc Pdus And 60-Adc Psms - Juniper PTX5000 Hardware Manual

8. Check the LEDs on the PSMs. For each PSM, verify that the PSM LEDs are lit steadily green.
Figure 143: PSM LEDs on the Single-Phase AC PDU
NOTE: If the PSM LED does not light steadily, see
System" on page 591
9. Repeat steps 6 through 8 for the other PDU.
10. On the external management device connected to the Routing Engine, monitor the startup process
to verify that the system has booted properly.
Powering On the DC Powered PTX5000 with 60-A DC PDUs and 60-A
DC PSMs
To power on the DC-powered PTX5000 with 60-A DC PDUs and 60-A DC PSMs:
PTX5000 Packet Transport Router Hardware Guide
in the
"Troubleshooting the PTX5000 Power
294
.