Troubleshooting The Ptx5000 Switch Fabric - Juniper PTX5000 Hardware Manual

Table 94: Troubleshooting Control Board Alarms
Alarm Type LCD Message
cb-number Failure
Red CB
CB cb-number Removed
cb-number Ethernet
Yellow CB
Switch Failure
Table 95: Troubleshooting Control Board LEDs
Label Color State
FAIL Yellow On steadily
OK – Off
SEE ALSO
PTX5000 Control Board LEDs | 135

Troubleshooting the PTX5000 Switch Fabric

IN THIS SECTION
Problem | 613
Solution | 613
CLI Message Alarm Condition
cb-number Failure
CB A Control Board failed.
CB cb-number Removed
A Control Board has
been removed.
cb-number Ethernet
CB The Ethernet switch on
the Control Board has
Switch Failure
failed.
Description
Control Board has failed.
Control Board is offline.
Recovery
Replace the
Control Board
Reinstall the
Control Board
Replace the
Control Board.
Recovery
Replace the Control Board.
Bring the Control Board online.
612