Juniper PTX5000 Hardware Manual page 342

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to

one of the ESD points on the chassis.

2. Grasp the fan tray by its handle and insert it straight into the chassis.

3. Tighten the captive screw on the left side of the fan tray faceplate to secure it in the chassis, using a

number 2 Phillips (+) screwdriver.

Figure 150: Installing an Upper Horizontal Fan Tray

Figure 151: Installing a Lower Horizontal Fan Tray

Chapters

Table of Contents