Juniper PTX5000 Hardware Manual page 69

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

• A metal retaining bracket located on the lower right to connect the wye AC power cord to the PDU.

• A metal wiring compartment that contains the AC input terminal block and ground. The AC terminal

block consists of three input terminals labeled L1, L2, and L3, from left to right. The neutral input is

• One 80-A circuit breaker.

• The output power switch provides power to the power supply modules.

• LEDs to monitor the status of the PDU.

Chapters

Table of Contents