WARNING: Do not touch the power connectors on the rear of the PDU. They can
contain dangerous voltages.
CAUTION: Do not leave a PDU slot empty for more than a short time while the
PTX5000 is operational. For proper airflow, the PDU must remain in the chassis or a
blank panel must be used in an empty slot.
Figure 213: Removing a High Capacity Single-Phase AC PDU
Installing a PTX5000 High Capacity Single-Phase AC PDU
To install a Single-Phase AC PDU:
1.
Ensure that the voltage across the AC power source is 0 V and that there is no chance that the
voltage might become active during installation.
406