Maintaining The Ptx5000 Host Subsystem - Juniper PTX5000 Hardware Manual

8. Remove the sticker liner from the new PSM slot label and apply it to the chassis, centered over the
screws.
Figure 246: Applying New PSM Slot Label
9. Repeat these steps for the other sleeve assemblies.
SEE ALSO
Replacing a PTX5000 High Capacity DC PSM | 447

Maintaining the PTX5000 Host Subsystem

IN THIS SECTION
Maintaining the PTX5000 Host Subsystem | 461
Understanding the Effect of Taking the PTX5000 Host Subsystem Offline | 462
460