Table 7: Fan Tray LEDs on the Craft Interface
Color
State
–
Off
Power Distribution Unit LEDs
One OK LED for each power distribution unit is located on the craft interface below the host subsytem
LEDs. The two LEDs are labeled 0 and 1.
Table 8: Power Distribution Unit LEDs
Colour
State
Description
Green
On steadily
PDU is functioning normally.
Red
On steadily
PDU has failed.
Off
—
PDU might be starting up or not receiving any input voltage. The circuit breakers might be
off.
Power Supply Modules LEDs
A status LED for each power supply module is located on the craft interface below the PDU LEDs. The
four PSM status LEDs are labeled 0 through 3.
NOTE: The existing PDUs support four PSMs whereas high capacity PDUs support eight PSMs.
(Continued)
Description
The fan tray is offline or absent.
27