Installing A Ptx5000 High Capacity Ac Psm - Juniper PTX5000 Hardware Manual

CAUTION: Each High Capacity AC PSM weighs approximately 9.8 lb (4.5 kg). Be
prepared to support the full weight of the PSM as you remove it from the PTX5000.
4. Place one hand underneath the PSM to support it and slide it completely out of the chassis.
Figure 220: Removing a High Capacity AC PSM

Installing a PTX5000 High Capacity AC PSM

The High Capacity DC PSMs are smaller in dimensions compared to the first-generation PSMs. So, you
must install the PSM sleeves to install the High Capacity DC PSMs in the chassis. See
High Capacity PSM Sleeves" on page 457
9.8 lb (4.5 kg).
To install a High Capacity AC PSM:
1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to
one of the ESD points on the chassis.
for details. Each High Capacity AC PSM weighs approximately
"Installing the
415