Juniper PTX5000 Hardware Manual page 49

(Continued)
Table 11: CCG LEDs
Label Color State
– Off
FAIL Yellow On steadily
– Off
MASTER Blue On steadily
– Off
Table 12: CCG Port LEDs
Label
LINK
NOTE: The LINK LEDs are supported only for the
BITS ports. This LED is not supported for the GPS
ports.
FAULT
SEE ALSO
Troubleshooting the PTX5000 Centralized Clock Generators | 571
Description
The CCG is not online or is not powered on.
The CCG has detected a failure.
The CCG has not detected a failure or is not powered on.
The CCG is functioning as the primary.
The CCG is functioning as the backup or is not powered on.
Color State
Green On steadily
Yellow On steadily
– Off
Yellow On steadily
– Off
Description
BITS signal is detected.
BITS loss of signal
There is no loss of signal, no signal
is detected.
The CCG has detected a failure.
The CCG has not detected a
failure or is not powered on.
31