Juniper PTX5000 Hardware Manual page 640

SIB6 Online
SIB7 Online
SIB8 Online
FPC0 Online
FPC1 Online
FPC2 Online
FPC3 Online
FPC4 Offline
FPC5 Online
FPC6 Online
FPC7 Offline
6. Use the following show chassis fpc detail command to display more detailed information. The following
examples specify a slot number, which is optional:
user@host> show chassis fpc detail 7
Slot 7 information:
State
Reason
user@host> show chassis fpc detail 4
Slot 4 information:
State
Reason
The output states indicate the following:
• Diagnostics—The FPC failed to initialize.
• No power—The FPC is not receiving enough power. Check the chassisd messages for power
allocation information.
Chassis Power
Total Power
PDU 0
None
None
None
None
None
None
None
None
None
Offline
No power
Offline
Configured power off
Input(V) Used(W)
3043
3043
622