Juniper PTX5000 Hardware Manual page 243

Retaining nut
1
—
Figure 89: Removing the Retaining Nut from a Three-Phase Delta AC Power Cord
Retaining nut
1
—
5. Put the wires of the AC power cord through the hole of the metal retaining bracket, and screw the
retaining nut onto the AC power cord to secure it to the metal retaining bracket (see
page 225).
Figure 90: Connecting the Metal Retaining Bracket to Three-Phase Delta AC Power Cord
Retaining nut
1
—
Metal retaining bracket
2
—
6. Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal AC wiring
compartment. Open the metal door of the metal AC wiring compartment. Push the wires of the AC
power cord into the area for the metal retaining bracket, and pull the wires to the left toward the
Three-phase delta AC power cord
2
—
Three-phase delta AC power cord
2
—
Three-phase delta AC power cord
3
—
225
Figure 90 on