Juniper PTX5000 Hardware Manual page 107

89
Each 60-A input power tray weighs 1.6 lb (0.7 kg), not including cables. The input power tray has two
inputs, labeled input –2 and input –1. Each input is labeled RTN and –48 V. The input power switch
for both inputs in each input power tray is located on the PDU above the input power tray.
Figure 44: 60-A DC Input Terminals
• LEDs to monitor the status of the PDU:
60-A DC PDU—PDU OK, SW0 ON, SW1 ON, SW2 ON, SW3 ON, DC IN 0 -1, DC IN 0 -2, DC IN 1
-1, DC IN 1 -2, DC IN 2 -1, DC IN 2 -2, DC IN 3 -1, DC IN 3 -2.