Installing A Ptx5000 Three-Phase Delta Ac Pdu Power Cord - Juniper PTX5000 Hardware Manual

NOTE: Reserve the retaining nut to attach the metal retaining bracket to the replacement AC
power cord.
Figure 176: Removing the Metal Retaining Bracket from the AC Power Cord
Retaining nut
1
—
Metal retaining bracket
2
—

Installing a PTX5000 Three-Phase Delta AC PDU Power Cord

To install a three-phase delta AC power cord:
1. Ensure that the voltage across the AC power source is 0 V and that there is no chance that the
voltage might become active during installation.
2. Switch the circuit breaker and power OUTPUT switch on the PDU to the off (O)position.
Three-phase delta AC power cord
3
—
362