Juniper PTX5000 Hardware Manual page 155

Table 51: Control Board CB-PTX Port LEDs
Port
Figure 67: Control Board CB2-PTX LEDs
1 LCL-MASTER, FAIL, and OK status LEDs
—
LINK and ACT LEDs for the HOST/
2
—
ETHERNET port
Table 52: Control Board CB2-PTX LEDs
Label Color
LCL-MASTER Blue
–
FAIL Yellow
–
OK Green
(Continued)
Label Color
ACT Green
State Description
On steadily Control Board is functioning as the primary.
Off Control Board is functioning as the backup.
On steadily Control Board has failed.
Off No faults are detected on the Control Board.
On steadily Control Board is online and is functioning normally.
State Description
– NOTE: This port is reserved for future
use.
3 Link and activity LEDs for the Gigabit
—
Ethernet ports labeled (X)GE 0 through (X)GE
17
MASTER, STBY, and RDY status LEDs. These
4
—
LEDs are reserved for future use for
multichassis applications.
137