Juniper PTX5000 Hardware Manual page 258

bracket (see Figure 106 on page
bracket to the PDU is the same for both metal brackets.
Figure 106: Metal Brackets for Power Cords
Metal Bracket with label Use for
1
—
740-053918, 740-059634 Power Cords—
740-053918 indicates the 100-A power
cord and 740-059634 the 150-A power
cord for the High Capacity Delta AC PDU.
6. Attach the power cord to the PDU:
a. Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal AC wiring
compartment.
b. Open the metal door of the metal AC wiring compartment.
c. Push the wires of the AC power cord into the area for the metal retaining bracket, and pull the
wires to the left toward the metal AC wiring compartment.
240). The installation procedure to connect the metal
Metal Bracket with label Use for
2
—
740-053919, 740-059635, 740-035459
Power Cords—740-053919 indicates the
power cord for the High Capacity Delta AC
PDU. 740-059635 indicates the 100-A
power cord and 740-035459 the 60-A
power cord.
240