Juniper PTX5000 Hardware Manual page 399

3. Gently push the AC power cord wires through the hole in the metal retaining bracket. Screw the
retaining nut onto the AC power cord to secure the metal retaining bracket to the replacement AC
power cord (see Figure 191 on page
Figure 191: Attaching the Metal Retaining Bracket to the AC Power Cord
Retaining nut
1
—
Metal retaining bracket
2
—
4. Using a number 2 Phillips (+) screwdriver, loosen the two captive screws on the metal AC wiring
compartment. Open the metal door of the metal AC wiring compartment.
5. Gently push the wires of the AC power cord into the area for the metal retaining bracket, and pull
the wires to the left toward the metal AC wiring compartment. Using a number 2 Phillips (+)
381).
Three-phase wye AC power cord
3
—
381