Juniper PTX5000 Hardware Manual page 498

d. Carefully slide the drive out of the slot.
Figure 256: Removing the SSD Drive From a RE-PTX-X8-64G
3. Reinstall a storage drive.
a. Carefully align the sides of the drive with the guides in the slot.
b. Slide the drive into the slot until you feel resistance, carefully ensuring that it is correctly aligned.
c. Close the access door and tighten the thumbscrew to secure the door.
4. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button or from the CLI by using
request chassis cb0/1 online command.
5. Verify that the SSD drive is recognized by using the show vmhost hardward command.
Figure 257: Installing an SSD Drive in a RE-PTX-X8-64G
1 Carrier
—
2 SSD drive
—
480