Related
Documentation
Maintaining M120 PICs and PIC Cables
Purpose
Action
Copyright © 2018, Juniper Networks, Inc.
Do not rest any edge of an FPC directly against a hard surface (see
Figure 108: Do Not Rest the FPC on an Edge
If you must rest the FPC temporarily on an edge while changing its orientation between
vertical and horizontal, use your hand as a cushion between the edge and the surface.
M120 Flexible PIC Concentrators (FPCs) Description on page 51
Replacing an M120 FPC on page 213
Storing an M120 FPC on page 271
For optimum router performance, verify the condition of the PICs and PIC cables.
On a regular basis:
Check the LEDs on PIC faceplates. Most PIC faceplates have an LED labeled
Some PICs have additional LEDs, often one per port. The meaning of the LED states
differs for various PICs. For more information, see the M120 Multiservice Edge Router
Interface Module Reference. If the FPC that houses the PIC detects a PIC failure, the
FPC generates an alarm message to be sent to the Routing Engine.
Chapter 31: Maintaining Components and Cables
Figure 108 on page
275).
.
STATUS
275