Juniper PTX5000 Hardware Manual page 573

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

Inspect the FPC to verify that the connectors are not misaligned or damaged.

Orient the FPC vertically with the component side facing to the right. Be sure the FPC is right-side

up, with the components on the right of the FPC.

CAUTION: When the FPC is out of the chassis, do not hold it by the ejector

handles, bus bars, or edge connectors. These components cannot support its

10. Carefully align the connector edge of the FPC with the appropriate empty slot in the chassis.

Chapters

Table of Contents