Unpacking The Ptx5000; Overview Of Unpacking The Ptx5000; Tools And Parts Required To Unpack The Ptx5000 - Juniper PTX5000 Hardware Manual

Unpacking the PTX5000

IN THIS SECTION

Overview of Unpacking the PTX5000 | 200

Tools and Parts Required to Unpack the PTX5000 | 200

Unpacking the PTX5000 | 201
Verifying the PTX5000 Parts Received | 203
Overview of Unpacking the PTX5000
To unpack the PTX5000:
1. Gather the tools required to unpack the PTX5000.
See "Tools and Parts Required to Unpack the PTX5000" on page
2. Remove the PTX5000, accessory box, tool kit, and all parts from the shipping crate.
See "Unpacking the PTX5000" on page
3. Verify that all parts have been received.
See "Verifying the PTX5000 Parts Received" on page
SEE ALSO
Overview of Installing the PTX5000 | 197
Tools and Parts Required to Unpack the PTX5000
Gather the tools required to unpack the PTX5000:
• Phillips (+) screwdriver, number 2
• 1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
• Blank panels to cover any slots not occupied by a component
200.
201.
203.
200