Juniper PTX5000 Hardware Manual page 579

Packet transport router

Hide thumbs Also See for PTX5000:

Table of Contents

5. Twist the ejector handles counterclockwise to unseat the SIB.

6. Grasp both ejector handles, pull firmly, and slide the SIB about three-quarters of the way out of the

Figure 291: Removing a SIB

7. Place one hand underneath the SIB to support it and slide it completely out of the chassis. Place it on

the antistatic mat.

CAUTION: Do not stack hardware components on one another after you remove

them. Place each component on an antistatic mat resting on a stable, flat surface.

Chapters

Table of Contents