Troubleshooting The Ptx5000 Host Subsystem - Juniper PTX5000 Hardware Manual

Table 90: Troubleshooting PSM Chassis Alarms
Alarm LCD Display CLI Message
Type Message
psm-
PSM PSM
number Absent Absent
Pwr Mgmt Non Power Manager
Op Non
Operational
RELATED DOCUMENTATION
PTX5000 AC Power Distribution Unit LEDs | 58
PTX5000 DC Power Distribution Unit LEDs | 99
PTX5000 AC Power Supply Module LEDs | 70
PTX5000 DC Power Supply Module LEDs | 105

Troubleshooting the PTX5000 Host Subsystem

IN THIS SECTION
Problem | 606
Solution | 606
(Continued)
Alarm Condition
psm-number
The PSM is not installed.
NOTE: This alarm is
generated by the following
Junos OS Releases:
12.1X48 12.3, and 13.2R1.
Junos OS Release 13.2R2
and later does not generate
this alarm.
Different types of PSMs are
present in the chassis.
NOTE: Zoning and
nonzoning PSMs might be
present.
Solution
If a required PSM is missing, install
the PSM.
If PSMs are not missing and you
continue to get the alarm, you can
install Junos OS Release 13.2R2 or
later.
Install the same type of PSMs in each
slot.
605