Logical Interfaces - Juniper ACX1000 Configuration Manual

Configuring the Minimum Number of Active Links on Multilink and Link Services Logical
Interfaces
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Configuring the Drop Timeout Period on Multilink and Link Services Logical Interfaces
Limiting Packet Payload Size on Multilink and Link Services Logical Interfaces
Example: Configuring a Link Services Interface with MLPPP
encapsulation (Logical Interface)
NOTE: Only MLPPP is supported on ACX Series routers. MLFR is not supported
on ACX Series routers.
You can set the minimum number of links that must be up for the multilink bundle as a
whole to be labeled up. By default, only one link must be up for the bundle to be labeled
up. A member link is considered up when the PPP Link Control Protocol (LCP) phase
transitions to open state.
The value should be identical on both ends of the bundle.
minimum-links
To set the minimum number, include the
minimum-links number;
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
For link services interfaces, you also can configure the minimum number of links at the
physical interface level by including the
ls-fpc/pic/port:channel mlfr-uni-nni-bundle-options]
minimum-links number;
The number can be from 1 through 8. The maximum number of links supported in a bundle
is 8. When 8 is specified, all configured links of a bundle must be up.
Link and Multilink Services Overview
Configuring Encapsulation for Multilink and Link Services Logical Interfaces on page 514
Configuring the Drop Timeout Period on Multilink and Link Services Logical Interfaces
Limiting Packet Payload Size on Multilink and Link Services Logical Interfaces
Configuring MRRU on Multilink and Link Services Logical Interfaces on page 516
Chapter 17: Configuring MLPPP
minimum-links statement:
statement at the
minimum-links
hierarchy level:
[edit interfaces
515