Configuring Point-To-Point Protocol (Ppp); Supported Ppp Interface Standards On Acx Series - Juniper ACX1000 Configuration Manual

CHAPTER 16

Configuring Point-to-Point Protocol (PPP)

Supported PPP Interface Standards on ACX Series

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Supported PPP Interface Standards on ACX Series on page 489
Configuring PPP Address and Control Field Compression on page 490
Configuring the PPP Restart Timers on page 491
Configuring PPP CHAP Authentication on page 492
Configuring the PPP Clear Loop Detected Timer on page 492
Configuring Dynamic Profiles for PPP on page 493
Configuring the PPP Challenge Handshake Authentication Protocol on page 493
Configuring the PPP Password Authentication Protocol On a Physical
Interface on page 496
Configuring the PPP Authentication Protocol on page 499
PPP Encapsulation on ACX Series Routers on page 500
Configuring Interface Encapsulation on Physical Interfaces in ACX Series on page 501
Junos OS substantially supports the following RFCs, which define standards for
Point-to-Point Protocol (PPP) interfaces.
RFC 1332, The PPP Internet Protocol Control Protocol (IPCP)
RFC 1334, PPP Authentication Protocols
RFC 1661, The Point-to-Point Protocol (PPP)
Accessing Standards Documents on the Internet
489